Alpes Lasers . TC-3 Bedienungsanleitung PDF herunterladen (Seite 17)

TC-3 Temperature Controller User’s Manual · Page 17

Menu Description Factory

Default

Comm Menu Communications Menu

Baud This sets the baud rate for the RS232

serial port. See the Computer

Interfacing Manual which is included

on the CD that accompanied this

product.

9600

Err While

Rmt

To turn off the display of errors while in

remote mode, set this value to “No”. To

display errors while in remote mode, set

this value to “Yes”.

Yes

Terminal

Mode

Terminal mode simply echoes any

characters received over the serial or

USB interfaces.

Msg Term This controls the output message

termination, and can be set to CR/LF,

CR, LF, or None.

CR/LF

Sys Menu System Settings Menu

Disp Mode Display mode, which is used to control

the layout on the main screen. Normal

will display four values, typically the set

point temperature, read back

temperature, current, and voltage.

Large will display the read back

temperature, sensor, or current,

depending on the mode (T, R, or ITE

mode, respectively). When changing the

set point, the set point will be displayed

during the set point change.

Normal

Brightness The vacuum florescent display can be

set to one of eight brightness levels.

100%

Audible

Beep

This setting controls when the unit

produces audible feedback. Set to No to

prevent sound, or Yes or audible alerts

such an error messages.

Yes

Lockout

Knob

Lockout knob allows you to disable knob

operation from the main display. This

prevents accidental changes of the set

point. The knob will always work in the

menus regardless of this setting.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Alpes Lasers . TC-3 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern